wikiroute

networking recipes

User Tools

Site Tools


a_networking_lab_on_qos_for_less_than_50_dollars

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
a_networking_lab_on_qos_for_less_than_50_dollars [2017/11/16 10:59]
samer [5. Access and Configuration]
a_networking_lab_on_qos_for_less_than_50_dollars [2017/11/16 11:01] (current)
samer [6. Before you Start/Leave]
Line 65: Line 65:
 For both routers, SSH is also activated, and they can be accessed by any SSH client on the platform. For easiness, you can also connect to the WiFi interfaces (OpenWrt and GL-iNet SSID) and configure the routers form your personal laptop. The root password for GL-iNet is ''​helloworld'',​ while no password is set for OpenWrt. For both routers, SSH is also activated, and they can be accessed by any SSH client on the platform. For easiness, you can also connect to the WiFi interfaces (OpenWrt and GL-iNet SSID) and configure the routers form your personal laptop. The root password for GL-iNet is ''​helloworld'',​ while no password is set for OpenWrt.
  
-===== -. Before you Start/Leave =====+===== -. Before you Leave =====
  
-Gracefully shutdown the raspberry pi modules with ''​shutdown -h now''​, switch ​off the TP-LINK and remove the USB power cable from the GL-iNet.+Before you leave, make sure to go through the following steps. 
 +  * Gracefully shutdown the raspberry pi modules with ''​shutdown -h now''​
 +  * Switch ​off the TP-LINK and remove the USB power cable from the GL-iNet
 +  * Power off the laptop.
a_networking_lab_on_qos_for_less_than_50_dollars.txt · Last modified: 2017/11/16 11:01 by samer