wikiroute

networking recipes

User Tools

Site Tools


exploring_lorawan

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
exploring_lorawan [2019/11/06 10:13]
samer [4. Applications]
exploring_lorawan [2019/11/06 10:14] (current)
samer [3. Devices]
Line 85: Line 85:
  
 Now you are ready to compile the sketch and upload it to the LoRaWAN device. Connect the device to a USB port on your PC, choose the board type as presented in [[exploring_lora|Exploring LoRa lab]] and select the corresponding port. Compile and upload! Now you are ready to compile the sketch and upload it to the LoRaWAN device. Connect the device to a USB port on your PC, choose the board type as presented in [[exploring_lora|Exploring LoRa lab]] and select the corresponding port. Compile and upload!
 +
 +<WRAP center round todo 60%>
 +Debugging causes memory problems on Arduino One and duemilanove. Debug level should stay 0.
 +</​WRAP>​
  
 Open the serial monitor in the Arduino IDE at 115200 baud and analyse the debug messages. Open the serial monitor in the Arduino IDE at 115200 baud and analyse the debug messages.
exploring_lorawan.txt ยท Last modified: 2019/11/06 10:14 by samer