Differences

This shows you the differences between two versions of the page.

--- exploring_lora [2018/10/22 16:53] – [5. Coverage Challenge] samer
+++ exploring_lora [2019/10/06 13:03] – [5. Coverage Challenge] samer
@@ Line 179: / Line 179: @@
 ===== -. Coverage Challenge =====
-In this section, you are required to establish a record of LoRa coverage. You can certainly unleash your scientific imagination, but some rules must be followed to validate the record:
+Start by identifying a set of three geographical locations or Test Points (TP). These TPs should be astutely chosen to explore the limits of LoRa coverage. Then, you should implement a function on the server that measures the ratio of successfully delivered packets or PDR (Packet Delivery Ratio). Now, you should run the experiment for three different radio configurations: such configurations should provide different reliability levels (high, medium, and low reliability).
+<WRAP center round help 100%>
+  * Draw the test points on a map and motivate your choices.
+  * Describe the radio configurations you selected and their impact on the reliability of the transmission.
+  * Visualise the experimental results by plotting the PDR for each TP and each radio configuration.
+  * Analyze the obtained results.
+</WRAP>
+You are now required to establish a record of LoRa coverage. You can certainly unleash your scientific imagination, but some rules must be followed to validate the record:
   * Direct transmission between the two devices is only considered.
@@ Line 186: / Line 195: @@
   * Supporting live video and screen capture should be used to authenticate the record.
 You can use the [[https://cloudrf.com/ | Cloud RF]] online service to obtain information on the elevation, Fresnel zone, and estimated path loss.
+<WRAP center round todo 60%>
+Take a look at this tool [[http://radiomobile.pe1mew.nl/index.php?Welcome...]].
+</WRAP>
 <WRAP center round help 100%>