Differences

This shows you the differences between two versions of the page.

--- exploring_lora [2018/10/22 15:17] – [5. Coverage Challenge] samer
+++ exploring_lora [2018/10/22 16:53] – [5. Coverage Challenge] samer
@@ Line 182: / Line 182: @@
   * Direct transmission between the two devices is only considered.
-  * 3D distance is computed between devices. You can use for example [[https://support.google.com/earth/answer/148134?hl=en |  Google Earth pro]] or get the elevation from this [[ http://www.geocontext.org/publ/2010/04/profiler/en/ | site]].
+  * 3D distance is computed between devices. You can get the elevation from this [[ http://www.geocontext.org/publ/2010/04/profiler/en/ | site]].
   * PDR must be higher than 10% as computed for 100 packets.
   * Supporting live video and screen capture should be used to authenticate the record.
-You can use the following online service [[https://cloudrf.com/ | Cloud RF]] to obtain information on the elevation, Fresnel zone, and estimated path loss.
+You can use the [[https://cloudrf.com/ | Cloud RF]] online service to obtain information on the elevation, Fresnel zone, and estimated path loss.
 <WRAP center round help 100%>
-  * Compute the Fresnel zone for your transmission. Comment the result.
+  * Compute the Fresnel zone for your transmission using [[https://cloudrf.com/ | Cloud RF]]. Comment the result.
-  * Provide the expression of the link budget and compute the received power using two different path loss models with Cloud RF.
+  * Provide the expression of the link budget and compute the received power using two different path loss models (ITM, Line of sight) with Cloud RF.
-  * Compare the received power obtained experimentally with the theoretical results.
+  * Compare the received power obtained experimentally with the results of Cloud RF.
   * Prepare a short presentation (5 minutes pitch) to describe your experiment.
 </WRAP>