Differences

This shows you the differences between two versions of the page.

--- deploying_lorawan [2017/05/02 17:51] – [3.1. Loraserver] samer
+++ deploying_lorawan [2017/05/02 17:58] – [3.1. Loraserver] samer
@@ Line 8: / Line 8: @@
   * Applications that enable to visualize and store the sensor data obtained from the devices.
-[{{ :lora-pilot-architecture.png?direct&650 | Figure 2. Architecture of the LoRaWAN Platform}}]
+[{{ :lora-pilot-architecture.png?direct&650 | Figure 1. Architecture of the LoRaWAN Platform}}]
 ===== -. Devices =====
 ==== -. Autonomo with LoRaBee ====
@@ Line 118: / Line 118: @@
 ==== -. Single Channel Gateway ====
-The single channel gateway includes a LoRa transmission module (Dragino Shield) connected to a Raspberry Pi (2 or 3) as shown in Figure 1. Communication between the two modules is done over an SPI interface.
+The single channel gateway includes a LoRa transmission module (Dragino Shield) connected to a Raspberry Pi (2 or 3) as shown in Figure 2. Communication between the two modules is done over an SPI interface.
 [{{ :2017-01-04_11.34.54.jpg?direct&300 |Figure 2. LoRa single channel gateway}}]
-In order to assemble the gateway, start by making the wire connections: the connection pins are identified in Figures 2 and 3.
+In order to assemble the gateway, start by making the wire connections: the connection pins are identified in Figures 3 and 4.
-[{{ :schema-single-channel-pi3.png?direct&300 |Figure 2. Dragino pin mapping}}]
+[{{ :schema-single-channel-pi3.png?direct&300 |Figure 3. Dragino pin mapping}}]
-[{{ :schema-pins-pi3.png?direct&300 |Figure 3. Raspberry pi 3 pins}}]
+[{{ :schema-pins-pi3.png?direct&300 |Figure 4. Raspberry pi 3 pins}}]
 Connect the Raspberry Pi to the Internet and install the packet forwarding software. The source code of the single channel packet forwarder is available on: [[https://github.com/samerlahoud/single_chan_pkt_fwd]]. In order to install it, you need to:
@@ Line 205: / Line 205: @@
 ==== -. Loraserver ====
-The Loraserver has a web interface for configuring the applications and devices on the platform. Full details for installing the software are provided on [[https://www.loraserver.io]]. Start by creating and application as in the following figure.
+The Loraserver has a web interface for configuring the applications and devices on the platform. Full details for installing the software are provided on [[https://www.loraserver.io]].
 [{{ :app-loraserver.png?direct&400 | Figure 5. Loraserver web interface}}]
+Start by creating and application as in Figure 5. Then create a node in this application and provide the following information:
+  * A unique node name
+  * The node description
+  * A unique device EUI on 64 bits: Random identifiers can be generated on [[https://www.random.org/bytes/]]
+  * The application EUI on 64 bits: this can be a common identifier for all nodes using the same application.
+  * A unique application key on 128 bits
+In order to enable OTAA join method, you have to make sure that the ''ABP activation'' button is unchecked.
 ==== -. The Things Network ====