Differences

This shows you the differences between two versions of the page.

--- container_lab_bridge_interface_proxmox [2023/01/18 11:04] – samer
+++ container_lab_bridge_interface_proxmox [2023/01/21 08:59] (current) – samer
@@ Line 1: / Line 1: @@
+<code bash>
 brctl addbr br-clab
 brctl addif br-clab eth0
+ip link set dev br-clab up
+</code>
-sudo containerlab deploy -t frr02.clab.yml
+<code bash>
+containerlab deploy -t frr02.clab.yml
+</code>
-docker exec -it d34d5f5b4ec2 vtysh
+<code bash>
+docker exec -it clab-frr02-router1 vtysh
-frr02.clab.yml
+</code>
-<code>
+<file autoconf frr02.clab.yml>
 name: frr02
@@ Line 39: / Line 44: @@
     - endpoints: ["router2:eth2", "router3:eth2"]
     - endpoints: ["br-clab:eth1", "router1:eth3"]
-</code>
+</file>
+<file autoconf router1/frr.conf>
+frr version 7.5.1_git
+frr defaults traditional
+hostname router1
+no ipv6 forwarding
+!
+interface eth1
+ ip address 192.168.1.1/24
+!
+interface eth2
+ ip address 192.168.2.1/24
+!
+interface eth3
+ ip address 172.18.100.254/16
+!
+interface lo
+ ip address 10.10.10.1/32
+!
+router ospf
+ network 192.168.1.0/24 area 0.0.0.0
+ network 192.168.2.0/24 area 0.0.0.0
+ network 172.18.0.0/16 area 0.0.0.0
+!
+line vty
+!
+</file>