Differences

This shows you the differences between two versions of the page.

--- qos_project [2017/12/03 13:03] – [1. Hardware] samer
+++ qos_project [2017/12/03 13:08] – [3. Software] samer
@@ Line 12: / Line 12: @@
-[{{ :glinet.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}]
+[{{ :glinet.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}][{{ :tp-link.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
-[{{ :tp-link.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
-===== -. Software =====
-The following tools can help in assessing the QoS on the platform:
+===== -. Addressing =====
-Install and compile netperf:
+The addressing plan of the platform is shown in Fig. 3. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
-<code bash>
+[{{ :qos-project.png?nolink&600 | Figure 3. Addressing plan for QoS platform}}]
-wget https://github.com/HewlettPackard/netperf/archive/master.zip
-unzip master .zip
-cd netperf-master/
-./configure --enable-demo=yes
-make
-make install
-</code>
-Install matplotlib and fping
-<code bash>
-apt-get install fping
-apt-get install python-qt4
-pip install matplotlib
-</code>
-Install flent
-<code bash>
-pip install flent
-</code>
-Install VLC as in this
-[[https://thepi.io/how-to-compile-vlc-media-player-with-hardware-acceleration-for-the-raspberry-pi/|tutorial]].
-===== -. Addressing =====
-the addressing plan of the platform is shown in Fig. 2. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
-[{{ :qos-project.png?nolink&600 | Figure 2. Addressing plan for QoS platform}}]
 ===== -. Access and Configuration =====