Differences

This shows you the differences between two versions of the page.

--- qos_project [2017/11/30 19:43] – [6. [CO2] Implementing the Applications and Tools] samer
+++ qos_project [2017/12/03 13:08] – [1. Hardware] samer
@@ Line 12: / Line 12: @@
-[{{ :tp-link.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}]
+[{{ :glinet.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}][{{ :tp-link.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
-[{{ :glinet.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
 ===== -. Software =====
 The following tools can help in assessing the QoS on the platform:
-Install and compile netperf:
+  * Install and compile netperf:
 <code bash>
 wget https://github.com/HewlettPackard/netperf/archive/master.zip
@@ Line 29: / Line 28: @@
 </code>
-Install matplotlib and fping
+  * Install matplotlib and fping
 <code bash>
@@ Line 42: / Line 41: @@
 </code>
-Install VLC as in this
+  * Install VLC as in this [[https://thepi.io/how-to-compile-vlc-media-player-with-hardware-acceleration-for-the-raspberry-pi/|tutorial]].
-[[https://thepi.io/how-to-compile-vlc-media-player-with-hardware-acceleration-for-the-raspberry-pi/|tutorial]].
 ===== -. Addressing =====
-the addressing plan of the platform is shown in Fig. 2. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
+The addressing plan of the platform is shown in Fig. 3. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
-[{{ :qos-project.png?nolink&600 | Figure 2. Addressing plan for QoS platform}}]
+[{{ :qos-project.png?nolink&600 | Figure 3. Addressing plan for QoS platform}}]
 ===== -. Access and Configuration =====