Differences

This shows you the differences between two versions of the page.

--- qos_project [2017/11/30 19:40] – [6.2. Flent Tool] samer
+++ qos_project [2017/12/03 13:08] – [1. Hardware] samer
@@ Line 12: / Line 12: @@
-[{{ :tp-link.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}]
+[{{ :glinet.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}][{{ :tp-link.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
-[{{ :glinet.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
 ===== -. Software =====
 The following tools can help in assessing the QoS on the platform:
-Install and compile netperf:
+  * Install and compile netperf:
 <code bash>
 wget https://github.com/HewlettPackard/netperf/archive/master.zip
@@ Line 29: / Line 28: @@
 </code>
-Install matplotlib and fping
+  * Install matplotlib and fping
 <code bash>
@@ Line 42: / Line 41: @@
 </code>
-Install VLC as in this
+  * Install VLC as in this [[https://thepi.io/how-to-compile-vlc-media-player-with-hardware-acceleration-for-the-raspberry-pi/|tutorial]].
-[[https://thepi.io/how-to-compile-vlc-media-player-with-hardware-acceleration-for-the-raspberry-pi/|tutorial]].
 ===== -. Addressing =====
-the addressing plan of the platform is shown in Fig. 2. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
+The addressing plan of the platform is shown in Fig. 3. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
-[{{ :qos-project.png?nolink&600 | Figure 2. Addressing plan for QoS platform}}]
+[{{ :qos-project.png?nolink&600 | Figure 3. Addressing plan for QoS platform}}]
 ===== -. Access and Configuration =====
@@ Line 203: / Line 201: @@
 </code>
 ===== -. [CO2] Implementing the Applications and Tools =====
-In order to describe and analyze the basic steps for installing and using the tools and client/server applications, we need to look carefully to these four applications: iperf, flent, VLC, HTTP.
+<WRAP center round info 100%>
+  * Accomplished
+      * Using the tools to obtain performance results of basic tests
+      * Wiki tutorial on the tools and applications
+  * Exceeded
+      * Installing tools on a new device
+</WRAP>
+In order to describe and analyze the basic steps for installing and using the tools and client/server applications, we need to look carefully to these four applications: iperf, flent, VLC, HTTP.
 ==== -. iperf tool ====