Differences

This shows you the differences between two versions of the page.

--- qos_project [2017/11/30 19:39] – [6. [CO2] Implementing the Applications and Tools] samer
+++ qos_project [2017/12/03 13:08] – [3. Software] samer
@@ Line 12: / Line 12: @@
-[{{ :tp-link.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}]
+[{{ :glinet.jpg?nolink&150 | Figure 1. GL-iNet 6461 wireless router}}][{{ :tp-link.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
-[{{ :glinet.jpg?nolink&150 | Figure 2. TP-Link WR741nd wireless router}}]
-===== -. Software =====
-The following tools can help in assessing the QoS on the platform:
+===== -. Addressing =====
-Install and compile netperf:
+The addressing plan of the platform is shown in Fig. 3. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
-<code bash>
+[{{ :qos-project.png?nolink&600 | Figure 3. Addressing plan for QoS platform}}]
-wget https://github.com/HewlettPackard/netperf/archive/master.zip
-unzip master .zip
-cd netperf-master/
-./configure --enable-demo=yes
-make
-make install
-</code>
-Install matplotlib and fping
-<code bash>
-apt-get install fping
-apt-get install python-qt4
-pip install matplotlib
-</code>
-Install flent
-<code bash>
-pip install flent
-</code>
-Install VLC as in this
-[[https://thepi.io/how-to-compile-vlc-media-player-with-hardware-acceleration-for-the-raspberry-pi/|tutorial]].
-===== -. Addressing =====
-the addressing plan of the platform is shown in Fig. 2. Both routers have static addresses on their wan and lan interfaces. DHCP is activated on the LAN interfaces and static leases are configured so as to obtain the addresses on the terminals according to the figure.
-[{{ :qos-project.png?nolink&600 | Figure 2. Addressing plan for QoS platform}}]
 ===== -. Access and Configuration =====
@@ Line 203: / Line 174: @@
 </code>
 ===== -. [CO2] Implementing the Applications and Tools =====
-In order to describe and analyze the basic steps for installing and using the tools and client/server applications, we need to look carefully to these four applications: iperf, flent, VLC, HTTP.
+<WRAP center round info 100%>
+  * Accomplished
+      * Using the tools to obtain performance results of basic tests
+      * Wiki tutorial on the tools and applications
+  * Exceeded
+      * Installing tools on a new device
+</WRAP>
+In order to describe and analyze the basic steps for installing and using the tools and client/server applications, we need to look carefully to these four applications: iperf, flent, VLC, HTTP.
 ==== -. iperf tool ====
@@ Line 233: / Line 212: @@
 ==== -. Flent Tool ====
-Let us now analyze flent application:
+Let us now analyze [[ https://flent.org/index.html | Flent]] application. Flent is a network benchmarking tools which allows to easily run network tests.
   * On the Server side: ''netserver &''
@@ Line 240: / Line 219: @@
   * To send 12 TCP streams:
      * On the Client side:  ''flent tcp_12up -p totals -l 60 -H 192.168.200.192 -t title3 -o test3.png''