Differences

This shows you the differences between two versions of the page.

--- qos_project [2017/11/29 09:14] – [Extracts] carine
+++ qos_project [2017/11/29 09:36] – [5. [CO1] Connecting the Platform] samer
@@ Line 128: / Line 128: @@
 </file>
-Similarly, the configuration of the GL-iNET router
+Similarly, the configuration of the GL-iNET router below shows the following:
+  * The WiFi interface is configured with a static IP address 192.168.8.1/24
+  * The WAN interface is configured with a static IP address 10.0.0.1/24
+  * A static route enables GL-iNET to reach the network 192.168.200.0/24 via 10.0.0.2 of the other router.
 <file bash /etc/config/network>
@@ Line 139: / Line 143: @@
         option _orig_ifname 'eth1'
         option _orig_bridge 'false'
-This interface (wifi) is configured with a static IP address 192.168.8.1/24
 config interface 'wan'
@@ Line 147: / Line 150: @@
         option ipaddr '10.0.0.1'
         option netmask '255.255.255.0'
-This interface (connected to the other router) is configured with a static IP address 10.0.0.1/24
 config route
@@ Line 154: / Line 156: @@
         option netmask '255.255.255.0'
         option gateway '10.0.0.2'
-This route enables GL-iNET to reach the network 192.168.200.0/24 via 10.0.0.2 of the other router.
 </file>
 ===== Extracts =====
@@ Line 206: / Line 206: @@
 </file>
 # DHCP configuration on router GL-iNet:
+<file /etc/config/dhcp>
 config dnsmasq
 	option domainneeded '1'
@@ Line 248: / Line 248: @@
 	option name 'console.gl-inet.com'
 	option ip '192.168.8.1'
+</file>
+#ifconfig on raspberry pi2
+<code bash>
+pi@raspberrypi:~ $ ifconfig
+eth0      Link encap:Ethernet  HWaddr b8:27:eb:0f:f8:95
+          inet addr:192.168.200.192  Bcast:192.168.200.255  Mask:255.255.255.0
+          inet6 addr: fdd5:bc83:a776:0:2377:1496:eb81:1433/64 Scope:Global
+          inet6 addr: fe80::20ae:134e:ae88:4bc5/64 Scope:Link
+          inet6 addr: fdd5:bc83:a776::192/128 Scope:Global
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:1216 errors:0 dropped:3 overruns:0 frame:0
+          TX packets:983 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:229130 (223.7 KiB)  TX bytes:121127 (118.2 KiB)
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          inet6 addr: ::1/128 Scope:Host
+          UP LOOPBACK RUNNING  MTU:65536  Metric:1
+          RX packets:221 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:221 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1
+          RX bytes:20606 (20.1 KiB)  TX bytes:20606 (20.1 KiB)
+</code>
+#ifconfig on raspberry pi3
+<code bash>
+pi@raspberrypi:~ $ ifconfig
+eth0      Link encap:Ethernet  HWaddr b8:27:eb:20:aa:54
+          inet addr:192.168.200.193  Bcast:192.168.200.255  Mask:255.255.255.0
+          inet6 addr: fe80::c7d8:36cf:a404:2c5/64 Scope:Link
+          inet6 addr: fdd5:bc83:a776:0:7379:7bf5:f8c5:b6ff/64 Scope:Global
+          inet6 addr: fdd5:bc83:a776::193/128 Scope:Global
+          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
+          RX packets:745 errors:0 dropped:3 overruns:0 frame:0
+          TX packets:394 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1000
+          RX bytes:66979 (65.4 KiB)  TX bytes:48816 (47.6 KiB)
+lo        Link encap:Local Loopback
+          inet addr:127.0.0.1  Mask:255.0.0.0
+          inet6 addr: ::1/128 Scope:Host
+          UP LOOPBACK RUNNING  MTU:65536  Metric:1
+          RX packets:256 errors:0 dropped:0 overruns:0 frame:0
+          TX packets:256 errors:0 dropped:0 overruns:0 carrier:0
+          collisions:0 txqueuelen:1
+          RX bytes:20736 (20.2 KiB)  TX bytes:20736 (20.2 KiB)
+</code>
+#ip route on raspberry pi2
+<code bash>
+pi@raspberrypi:~ $ ip route
+default via 192.168.200.1 dev eth0  metric 202
+.168.200.0/24 dev eth0  proto kernel  scope link  src 192.168.200.192  metric                                                                                                                                                              202
+</code>
+#ip route on raspberry pi3
+<code bash>
+pi@raspberrypi:~ $ ip route
+default via 192.168.200.1 dev eth0  metric 202
+.168.200.0/24 dev eth0  proto kernel  scope link  src 192.168.200.193  metric 202
+</code>