Differences

This shows you the differences between two versions of the page.

--- qos_project [2017/11/29 09:04] – [5. [CO1] Connecting the Platform] samer
+++ qos_project [2017/11/29 09:14] – [Extracts] carine
@@ Line 81: / Line 81: @@
 <code bash>
-.0.0.0/24 dev eth0  proto kernel  scope link  src 10.0.0.1 # Loopback address
+.0.0.0/24 dev eth0  proto kernel  scope link  src 10.0.0.1 # loopback address
-.168.8.0/24 dev wlan0  proto kernel  scope link  src 192.168.8.1 # Connection to the wifi interface
+.168.8.0/24 dev wlan0  proto kernel  scope link  src 192.168.8.1 # connection to the wifi interface
-.168.100.0/24 dev eth1  proto kernel  scope link  src 192.168.100.1 # Connection to the LAN 192.168.100.0/24
+.168.100.0/24 dev eth1  proto kernel  scope link  src 192.168.100.1 # connection to the LAN 192.168.100.0/24
-.168.200.0/24 via 10.0.0.2 dev eth0  proto static # Static route to the 192.168.200.0/24 network via the interface
+.168.200.0/24 via 10.0.0.2 dev eth0  proto static # static route to the 192.168.200.0/24 network via the interface
 .0.0.2 of the TP-LINK router
 </code>
@@ Line 126: / Line 126: @@
         option netmask '255.255.255.0'
         option gateway '10.0.0.1'
 </file>
-<file bash /etc/config/network>
+Similarly, the configuration of the GL-iNET router
-#Configuration of GL-iNET:
-All the network configuration on both routers (routing & addressing) are taken from /etc/config/network:
-On router GL-iNET, /etc/config/network shows the following:
+<file bash /etc/config/network>
 config interface 'lan'
         option force_link '1'
@@ Line 163: / Line 159: @@
 </file>
 ===== Extracts =====
+#On TPlink router
+<file /etc/config/dhcp>
+config dnsmasq
+        option domainneeded '1'
+        option boguspriv '1'
+        option filterwin2k '0'
+        option localise_queries '1'
+        option rebind_protection '1'
+        option rebind_localhost '1'
+        option local '/lan/'
+        option domain 'lan'
+        option expandhosts '1'
+        option nonegcache '0'
+        option authoritative '1'
+        option readethers '1'
+        option leasefile '/tmp/dhcp.leases'
+        option resolvfile '/tmp/resolv.conf.auto'
+        option localservice '1'
+config dhcp 'lan'
+        option interface 'lan'
+        option start '100'
+        option limit '150'
+        option leasetime '12h'
+        option dhcpv6 'server'
+        option ra 'server'
+config dhcp 'wan'
+        option interface 'wan'
+        option ignore '1'
+config odhcpd 'odhcpd'
+        option maindhcp '0'
+        option leasefile '/tmp/hosts/odhcpd'
+        option leasetrigger '/usr/sbin/odhcpd-update'
+config host
+        option name 'pi2'
+        option mac 'b8:27:eb:0f:f8:95'
+        option ip '192.168.200.192'
+config host
+        option name 'pi3'
+        option mac 'b8:27:eb:20:aa:54'
+        option ip '192.168.200.193'
+</file>
+# DHCP configuration on router GL-iNet:
+config dnsmasq
+	option domainneeded '1'
+	option boguspriv '1'
+	option localise_queries '1'
+	option rebind_protection '1'
+	option rebind_localhost '1'
+	option local '/lan/'
+	option domain 'lan'
+	option expandhosts '1'
+	option authoritative '1'
+	option readethers '1'
+	option leasefile '/tmp/dhcp.leases'
+	option resolvfile '/tmp/resolv.conf.auto'
+config dhcp 'lan'
+	option interface 'lan'
+	option start '100'
+	option limit '150'
+	option leasetime '12h'
+	option dhcpv6 'server'
+	option ra 'server'
+	option ra_management '1'
+config dhcp 'wan'
+	option interface 'wan'
+	option ignore '1'
+config odhcpd 'odhcpd'
+	option maindhcp '0'
+	option leasefile '/tmp/hosts/odhcpd'
+	option leasetrigger '/usr/sbin/odhcpd-update'
+config dhcp
+	option start '100'
+	option leasetime '12h'
+	option limit '150'
+	option interface 'eth1'
+config domain 'localhost'
+	option name 'console.gl-inet.com'
+	option ip '192.168.8.1'