Differences

This shows you the differences between two versions of the page.

--- qos_project [2017/11/29 08:54] – [5. [CO1] Connecting the Platform] samer
+++ qos_project [2017/11/29 08:59] – [5. [CO1] Connecting the Platform] samer
@@ Line 97: / Line 97: @@
 </code>
-<code bash>
+On the two routing devices, the configuration is given in the ''/etc/config/network'' files as on a typical OpenWrt system.
+<file bash /etc/config/network>
 #Configurations on TP-LINK router
@@ Line 127: / Line 129: @@
         option netmask '255.255.255.0'
         option gateway '10.0.0.1'
+</file>
+<file bash /etc/config/network>
+#Configuration of GL-iNET:
+All the network configuration on both routers (routing & addressing) are taken from /etc/config/network:
+On router GL-iNET, /etc/config/network shows the following:
+config interface 'lan'
+        option force_link '1'
+        option proto 'static'
+        option ipaddr '192.168.8.1'
+        option netmask '255.255.255.0'
+        option ip6assign '60'
+        option _orig_ifname 'eth1'
+        option _orig_bridge 'false'
+This interface (wifi) is configured with a static IP address 192.168.8.1/24
+config interface 'wan'
+        option ifname 'eth0'
+        option hostname 'GL-iNet-b2d'
+        option proto 'static'
+        option ipaddr '10.0.0.1'
+        option netmask '255.255.255.0'
+This interface (connected to the other router) is configured with a static IP address 10.0.0.1/24
+config route
+        option interface 'wan'
+        option target '192.168.200.0'
+        option netmask '255.255.255.0'
+        option gateway '10.0.0.2'
+This route enables GL-iNET to reach the network 192.168.200.0/24 via 10.0.0.2 of the other router.
-</code>
+</file>
 ===== Extracts =====