wikiroute

networking recipes

User Tools

Site Tools


exploring_lorawan

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
exploring_lorawan [2019/10/23 14:16] – [8. Backend] samerexploring_lorawan [2019/10/23 14:22] – [3. Devices] samer
Line 29: Line 29:
   * A unique device name: ''IoT-GX'' (where ''X'' is your group number)   * A unique device name: ''IoT-GX'' (where ''X'' is your group number)
   * The device description   * The device description
-  * A unique device EUI on 64 bits: Random identifiers can be generated on [[https://www.random.org/bytes/]]+  * A unique device EUI on 64 bits: click on the circular arrow to generate a random EUI.
   * A unique application key on 128 bits also obtained by random generation.   * A unique application key on 128 bits also obtained by random generation.
    
Line 42: Line 42:
 Devices in the LoRaWAN platform are implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[exploring_lora|Exploring LoRa lab]].  Devices in the LoRaWAN platform are implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[exploring_lora|Exploring LoRa lab]]. 
  
-Start by verifying the installation on your PC of the latest Arduino IDE. Unzip the Arduino {{ :arduino-lmic-master.zip |LMIC library}} and copy it to your sketchbook library folder as detailed in [[https://www.arduino.cc/en/Guide/Libraries]]. Then, download and open the example sketch {{ :example-code-idoe-iot-lab.zip |example-code-idoe-iot-lab.ino}} with Arduino IDE.+Start by verifying the installation on your PC of the latest Arduino IDE. Unzip the Arduino {{ :arduino-lmic-mcci.zip |LMIC library}} and copy it to your sketchbook library folder as detailed in [[https://www.arduino.cc/en/Guide/Libraries]]. Then, download and open the example sketch {{ :example-code-idoe-iot-lab.zip |example-code-idoe-iot-lab.ino}} with Arduino IDE.
  
 Now you should configure your device with the same identifiers ''DEVEUI'' and ''APPKEY'' as in the backend: Now you should configure your device with the same identifiers ''DEVEUI'' and ''APPKEY'' as in the backend:
exploring_lorawan.txt · Last modified: 2021/11/02 06:31 by samer