Differences

This shows you the differences between two versions of the page.

--- exploring_lorawan [2017/11/24 14:34] – [1. Platform] samer
+++ exploring_lorawan [2017/11/24 19:59] – [3. Devices] samer
@@ Line 24: / Line 24: @@
 [{{ :app-loraserver.png?direct&600 | Figure 2. Loraserver web interface}}]
-Start by choosing the application named ''NTRE-1617'' to create a new node. You should provide the following information:
+Start by choosing the application named ''RCTE-1718'' to create a new node. You should provide the following information:
-  * A unique node name: ''NTRE-GX'' (where ''X'' is your group number)
+  * A unique node name: ''RCTE-GX'' (where ''X'' is your group number)
   * The node description
   * A unique device EUI on 64 bits: Random identifiers can be generated on [[https://www.random.org/bytes/]]
@@ Line 41: / Line 41: @@
 ===== -. Devices =====
-Devices in the LoRaWAN platform are implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]].
+Devices in the LoRaWAN platform are implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[exploring_lora|Exploring LoRa lab]].
-Start by verifying the installation on your PC of the latest Arduino IDE. Drop the Arduino LMIC library in the corresponding folder. These tools are provided at the beginning of the challenge. Open the example sketch ''example-code-ntre-iot-challenge.ino'' with Arduino IDE.
+Start by verifying the installation on your PC of the latest Arduino IDE. Unzip the Arduino {{ :arduino-lmic-master.zip |LMIC library}} and copy it to your sketchbook library folder as detailed in [[https://www.arduino.cc/en/Guide/Libraries]]. Then, download and open the example sketch {{ :example-code-rcte-iot-lab.zip |example-code-rcte-iot-lab.ino}} with Arduino IDE.
-<WRAP left round help 100%>
-  * Give the characteristics of the Arduino you are using: model, number of pins, type of pins, memory sizes, etc.
-  * Give the main characteristics of the LoRa shield from Dragino (www.dragino.com).
-  * What type of Antenna are you using? Explain the corresponding characteristics.
-</WRAP>
 Now you should configure your device with the same identifiers ''APPEUI'', ''DEVEUI'', and ''APPKEY'' as in the backend: