Differences

This shows you the differences between two versions of the page.

--- exploring_lora [2018/10/06 13:43] – [1.1. Hardware Platform] samer
+++ exploring_lora [2018/10/06 13:47] – [1.3. Installation] samer
@@ Line 31: / Line 31: @@
 Unzip the RadioHead library and copy it to your sketchbook library folder as detailed in [[https://www.arduino.cc/en/Guide/Libraries]].
-<WRAP center round tip 75%>
-Note well the location of the library folder on your computer. In the following, you will be required to modify source files located in this folder.
-</WRAP>
 ==== -. Installation ====
@@ Line 43: / Line 39: @@
 Connect the two Arduino devices to USB ports on your computer. If this is the first time you use Arduino IDE, make sure to install the necessary USB drivers by selecting ''Tools'' > ''Boards Manager'' and installing Arduino AVR boards.
-Now, you have to choose the ''Board'' type as ''Arduino/Genuino Mega 2560'' in the ''Tools'' menu and select the corresponding serial ''Port'' to start programming your Arduino.
+Now, you have to choose the ''Board'' type as ''Arduino/Genuino Mega 2560'' or ''Arduino Duemilanove or Diecimilia'' in the ''Tools'' menu and select the corresponding serial ''Port'' to start programming your Arduino.
 <WRAP center round tip 75%>
 For Arduino Mega 2560, additional drivers for Microsoft Windows can be installed from [[http://wch.cn/download/CH341SER_ZIP.html]].
 </WRAP>
 ===== -. Theoretical Study =====