Differences

This shows you the differences between two versions of the page.

--- exploring_lora [2018/09/30 10:28] – [3.1. Modifying the Radio Parameters] samer
+++ exploring_lora [2018/09/30 10:33] – [4.2. Coverage] samer
@@ Line 69: / Line 69: @@
 Download the {{ :sketch-1819.zip | basic sketches}} that implement a simple LoRa communication between the two devices: a client and a server. Open the sketches with Arduino IDE. Make sure to choose the correct ''Board'' and ''Port'' in the ''Tools'' menu.
-Take a look at the source code in ''rf95_client.ino'' and ''rf95_server.ino''. Particularly, the ''setup'' function configures the radio parameters of your LoRa devices:
+Take a look at the source code in ''rf95_client.ino'' and ''rf95_server.ino''. Particularly, the following extract from the ''setup'' function configures the radio parameters of your LoRa devices:
   * Central frequency
@@ Line 121: / Line 121: @@
 ==== -. Time on Air ====
-In this section, you will measure the Time on Air (ToA) that is given by the time necessary to transmit a message on the radio interface . You will assess the impact of the spreading factor, bandwidth, coding rate, and message size on the ToA.
+In this section, you will measure the Time on Air (ToA) that is given by the time necessary to transmit a message on the radio interface. You will assess the impact of the spreading factor, bandwidth, coding rate, and message size on the ToA.
 Start by implementing a function on the client that measures the time necessary for sending a message. For example, you can use the [[https://www.arduino.cc/en/Reference/Micros| micros()]] function available in the arduino libraries. Now, you can modify one of the parameters (spreading factor, bandwidth, coding rate, message size) and record the impact on the ToA. Note well that you may need to repeat the experiment multiple times in order to obtain the statistical distribution.
@@ Line 135: / Line 135: @@
 In this section, you will measure the coverage of LoRa under different radio configurations.
-Start by identifying a set of five geographical locations or Test Points (TP). These TPs should be astutely chosen to explore the limits of LoRa coverage. Then, you should implement a function on the server that measures the ratio of successfully delivered packets or PDR. Now, you should run the experiment for three different radio configurations: such configurations should ensure different reliability levels (high, medium, and low reliability).
+Start by identifying a set of five geographical locations or Test Points (TP). These TPs should be astutely chosen to explore the limits of LoRa coverage. Then, you should implement a function on the server that measures the ratio of successfully delivered packets or PDR (Packet Delivery Ratio). Now, you should run the experiment for three different radio configurations: such configurations should ensure different reliability levels (high, medium, and low reliability).
 <WRAP center round help 100%>