Differences

This shows you the differences between two versions of the page.

--- exploring_lora [2018/09/29 15:44] – samer
+++ exploring_lora [2018/09/29 17:27] – [4.1. Time on Air] samer
@@ Line 123: / Line 123: @@
 In this section, you will measure the Time on Air (ToA) as given by the time necessary to transmit a message on the radio interface. You will assess the impact of the spreading factor, bandwidth, coding rate, and the message size on the ToA.
-For this, you will start by implementing a function on the client that measures the time necessary for sending a message. For example, you can use the [[https://www.arduino.cc/en/Reference/Micros| micros()]] function available in the arduino libraries. Now, you can modify one of the parameters (spreading factor, bandwidth, coding rate, message size) and record the impact on the ToA. Note well that you may need to repeat the expriment to obtain the statistical distributions.
+For this, you will start by implementing a function on the client that measures the time necessary for sending a message. For example, you can use the [[https://www.arduino.cc/en/Reference/Micros| micros()]] function available in the arduino libraries. Now, you can modify one of the parameters (spreading factor, bandwidth, coding rate, message size) and record the impact on the ToA. Note well that you may need to repeat the experiment in order to obtain the statistical distributions.
 <WRAP center round help 100%>