Differences

This shows you the differences between two versions of the page.

--- esib_iot_challenge [2017/05/17 16:20] – [2. Backend] samer
+++ esib_iot_challenge [2017/05/17 17:32] – [3. Devices] samer
@@ Line 19: / Line 19: @@
   * How LoRa is compatible with LPWAN requirements and constraints?
   * What is LoRaWAN? What is the difference between LoRaWAN and LoRa?
-  * Illustrate the protocol stacks on the LoRaWAN platform (you can refer to the contents of this presentation https://speakerdeck.com/iotusj/end-to-end-lorawan-platform).
+  * Illustrate the protocol stacks on the LoRaWAN platform.
   * What elements are IP enabled in the platform? What do you think about IP support in IoT?
 </WRAP>
 ===== -. Backend =====
-In LoRaWAN, the devices communicate to a backend Loraserver through the gateway. The backend implements the network server functions and provides frame control and security. It has a web interface for configuring the applications and devices on the platform (https://212.98.XX.XX:8080).
+In a LoRaWAN network, the devices communicate with a Network Server through the gateway. The backend installed in the platform is based on an open-source LoRaWAN network-server https://www.loraserver.io. A web interface is available for configuring the applications and devices on the platform (https://212.98.XX.XX:8080).
-[{{ :app-loraserver.png?direct&400 | Figure 5. Loraserver web interface}}]
+[{{ :app-loraserver.png?direct&400 | Figure 2. Loraserver web interface}}]
 Start by choosing the application named ''NTRE-1617'' to create a new node. You should provide the following information:
@@ Line 46: / Line 46: @@
 Devices in the LoRaWAN platform are implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]].
-Start by verifying the installation on your PC of the latest Arduino IDE and place the Arduino LMIC library in the corresponding folder.
+Start by verifying the installation on your PC of the latest Arduino IDE. Drop the Arduino LMIC library in the corresponding folder. These tools are provided at the beginning of the challenge.
 <WRAP left round help 100%>
-  * Give the characteristics of the Arduino you are using: number of pins, type of pins, memory sizes, etc.
+  * Give the characteristics of the Arduino you are using: model, number of pins, type of pins, memory sizes, etc.
   * Give the main characteristics of the LoRa shield from Dragino (www.dragino.com).
   * What type of Antenna are you using? Explain the corresponding characteristics.
@@ Line 112: / Line 112: @@
   * Security
 </WRAP>
 ===== -. Applications =====
 mqtt-spy is an open source utility intended to help you with monitoring activity on MQTT topics. It has been designed to deal with high volumes of messages, as well as occasional publications. mqtt-spy is a JavaFX application, so it should work on any operating system with an appropriate version of Java 8 installed. A very useful tutorial is available on [[https://github.com/eclipse/paho.mqtt-spy/wiki]].
 You can use mqtt-spy to debug the messages received from the LoRaWAN devices. For this, you should download the software tool from [[https://github.com/eclipse/paho.mqtt-spy/wiki]]. After starting the application, configure a new connection to the MQTT broker by simply adding the IP address of the broker in the ''Server URI'' field. Now you can subscribe to any MQTT topic. If you want to receive all messages arriving at the backend, you can use the generic topic ''#''. You can also limit to the topic including the messages of any specific device: ''application/APPLICATION_ID/node/DEVICE_EUI/rx''.