Differences

This shows you the differences between two versions of the page.

--- esib_iot_challenge [2017/05/17 09:17] – [2.1. Autonomo with LoRaBee] samer
+++ esib_iot_challenge [2017/05/17 09:36] – [2.1. Arduino with Dragino Shield] samer
@@ Line 15: / Line 15: @@
 ===== -. Devices =====
+==== -. PC Configuration ====
+In orde to program the LoRaWAN devices, you should verify the installation one your PC of the following software:
+  * Arduino IDE
+  * LMIC Library
 ==== -. Arduino with Dragino Shield ====
 === -. Periodic Message Sending ===
-Devices in the LoRaWAN platform can also be implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]]. Similarly to the Autonomo device, you can download the following sketch {{ :test-loraserver-comb-loraserver-dragino.zip |}} and modify it according to your preferences. Below you can find somme commented extracts of the sketch.
+Devices in the LoRaWAN platform are implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]]. You can download the following sketch {{ :test-loraserver-comb-loraserver-dragino.zip |}} and modify it according to your preferences. Below you can find somme commented extracts of the sketch.
 The pin mapping corresponds to the Dragino electronic schematic: