Differences

This shows you the differences between two versions of the page.

--- deploying_lorawan [2017/05/01 14:01] – [1.2. Arduino with Dragino Shield] samer
+++ deploying_lorawan [2017/05/01 14:49] – samer
@@ Line 69: / Line 69: @@
 ==== -. Arduino with Dragino Shield ====
-Devices in the LoRaWAN platform can also be implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]]. As for the Autonomo device, you can download the following sketch {{ :test-loraserver-comb-loraserver-dragino.zip |}} and modify it according to your preferences. Below you can find somme commented extracts of the sketch.
+Devices in the LoRaWAN platform can also be implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]]. Similarly to the Autonomo device, you can download the following sketch {{ :test-loraserver-comb-loraserver-dragino.zip |}} and modify it according to your preferences. Below you can find somme commented extracts of the sketch.
 The pin mapping corresponds to the Dragino electronic schematic:
@@ Line 110: / Line 110: @@
 LMIC_setDrTxpow(DR_SF7,14);
 </code>
+You can also find another example of sketch to download: {{ :test-loraserver-moisture-on-move.ino.zip |}}. Here the message sending is not periodic but related to an event. For example, an infrared sensor detects a movement and triggers a signal for the device to send a LoRaWAN message.
 ===== -. Gateways =====
 ==== -. Single Channel Gateway ====