wikiroute

networking recipes

User Tools

Site Tools


deploying_lorawan

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
Next revisionBoth sides next revision
deploying_lorawan [2017/04/30 17:04] – [2.1. Single Channel Gateway] samerdeploying_lorawan [2017/05/01 15:02] – [1.2. Arduino with Dragino Shield] samer
Line 68: Line 68:
 </code> </code>
 ==== -. Arduino with Dragino Shield ==== ==== -. Arduino with Dragino Shield ====
 +=== -. Periodic Message Sending ===
  
-Devices in the LoRaWAN platform can also be implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]]. As for the Autonomo device, you can download the following sketch {{ :test-loraserver-comb-loraserver-dragino.zip |}} and modify it according to your preferences. Below you can find somme commented extracts of the sketch.+Devices in the LoRaWAN platform can also be implemented on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]]. Similarly to the Autonomo device, you can download the following sketch {{ :test-loraserver-comb-loraserver-dragino.zip |}} and modify it according to your preferences. Below you can find somme commented extracts of the sketch.
  
 The pin mapping corresponds to the Dragino electronic schematic: The pin mapping corresponds to the Dragino electronic schematic:
Line 96: Line 97:
 </code> </code>
  
-This send function is initially scheduled here:+The send function is initially scheduled here:
 <code c++> <code c++>
 do_send(&sendjob); do_send(&sendjob);
Line 110: Line 111:
 LMIC_setDrTxpow(DR_SF7,14); LMIC_setDrTxpow(DR_SF7,14);
 </code> </code>
 +
 +=== -. Triggered Message Sending ===
 +
 +You can also find another example of sketch to download: {{ :test-loraserver-moisture-on-move.ino.zip |}}. Here the message sending is not periodic but related to an event. For example, an infrared sensor detects a movement and triggers a signal for the device to send a LoRaWAN message. Note also that the join method used in this second sketch is Activation by Personalisation (ABP): the device address, the network session key, and the application session key are directly configured on the device.
 ===== -. Gateways ===== ===== -. Gateways =====
 ==== -. Single Channel Gateway ==== ==== -. Single Channel Gateway ====
deploying_lorawan.txt · Last modified: 2021/08/28 09:50 by samer