Differences

This shows you the differences between two versions of the page.

--- deploying_lorawan [2017/04/30 16:57] – [Deploying an End-to-End LoRaWAN Platform] samer
+++ deploying_lorawan [2017/04/30 17:04] – [2.1. Single Channel Gateway] samer
@@ Line 147: / Line 147: @@
 </code>
-Now, you need to configure the single channel packet forwarder. This is done in the ''global_conf.json'' configuration file. Particularly, you need to choose the channel, the spreading factor, the pins for SPI communication, and the address of the backend server. Note that you can specify multiple backends for testing purposes.
+Now, you need to configure the single channel packet forwarder. This is done in the {{ :global_config.json.zip |}} configuration file. Particularly, you need to choose the channel, the spreading factor, the pins for SPI communication, and the address of the backend server. Note that you can specify multiple backends for testing purposes.
-<file | global_config.json>
-{
-  "SX127x_conf":
-  {
-    "freq": 868100000,
-    "spread_factor": 7,
-    "pin_nss": 6,
-    "pin_dio0": 7,
-    "pin_rst": 0,
-    "pin_led1":4
-  },
-  "gateway_conf":
-  {
-    "ref_latitude": 33.86576536772,
-    "ref_longitude": 35.56378662935,
-    "ref_altitude": 165,
-    "name": "ESIB SC Gateway",
-    "email": "cimti@usj.edu.lb",
-    "desc": "Dragino Single Channel Gateway on RPI",
-    "servers":
-    [
-      {
-        "address": "router.eu.thethings.network",
-        "port": 1700,
-        "enabled": true
-      },
-      {
-        "address": "212.98.137.194",
-        "port": 1700,
-        "enabled": true
-      },
-      {
-        "address": "172.17.17.129",
-        "port": 1700,
-        "enabled": false
-      }
-    ]
-  }
-}
-</file>
 Finally, you can run the packet forwarder as root!