Differences

This shows you the differences between two versions of the page.

--- deploying_lorawan [2017/04/30 12:27] – [1.2. Arduino with Dragino Shield] samer
+++ deploying_lorawan [2017/04/30 13:26] – [1.2. Arduino with Dragino Shield] samer
@@ Line 66: / Line 66: @@
 ==== -. Arduino with Dragino Shield ====
-End-devices can
+Devices in the LoRaWAN platform can also be used on Arduino boards with Dragino shields. The combined module as well as the basic configuration steps are presented in [[simple_lora_prototype|Simple Prototype of LoRa Communications]]. As for the Autonomo device, you can download the following sketch {{ :test-loraserver-comb-loraserver-dragino.zip |}} and modify it according to your preferences. Here are some extracts of the sketch:
+Do not forget to insert you keys for the OTAA join method.
+<code c++>
+const lmic_pinmap lmic_pins = {
+    .nss = 10,
+    .rxtx = LMIC_UNUSED_PIN,
+    .rst = 9,
+    .dio = {2, 6, 7},
+};
+</code>
+<code c++>
+        case EV_TXCOMPLETE:
+            Serial.println(F("EV_TXCOMPLETE (includes waiting for RX windows)"));
+            if(LMIC.dataLen) {
+                // data received in rx slot after tx
+                Serial.print(F("Data Received: "));
+                Serial.write(LMIC.frame+LMIC.dataBeg, LMIC.dataLen);
+                Serial.println();
+            }
+            // Schedule next transmission
+            os_setTimedCallback(&sendjob, os_getTime()+sec2osticks(TX_INTERVAL), do_send);
+            break;
+</code>
+<code c++>
+LMIC_setTxData2(1, (uint8_t*) buffer, message.length() , 0);
+</code>
+<code c++>
+LMIC_setDrTxpow(DR_SF7,14);
+</code>
+<code c++>
+do_send(&sendjob);
+</code>
 ===== -. Gateways =====
 ==== -. Single Channel Gateway ====